A Step By Step Guide For Efficiently Insulating Your Garage Door

Are you thinking to do it yourself the garage door insulation? Insulation process made easier than never before. Don't waste a single minute to find out more.

Garage door insulation has a lot more to offer other than lowering the energy bills. It enhances the comfort during seasonal changes and maintains the temperature inside which promotes the thermal effect in your garage. It also helps in reducing the noise which is appreciated by many homeowners. Almost everyone is familiar with its ability to act as a barrier against the moisture infiltration. Seeing so many benefits, who would not like to insulate their garage doors? Fortunately, this complete process can be carried out at home with the help of basic tools and hardware supplies.

Step By Step Procedure For A Garage Door Insulation

1. Measurement

First, take the approximate measurement of the garage door panel area in an endeavor to find out the quantity of the insulation required to cover the garage door. You can use a tape measure to determine the area of the panels. Only rough figures of the dimensions would be adequate for you. You may start with the inside face of the door.

2. Buy Insulation

Now, the next step is to purchase the insulation. The two types that work well with the garage doors are reflective foil insulation and polystyrene foam. 'Foil' type is a sheet of polyethylene and being flexible, usually sold in rolls. This is suitable for a DIY insulation operation. The other type is made up of polystyrene and do offer good insulating properties. However, being highly rigid, this type is not suitable for a novice for the purpose of a DIY.

The other types of insulation you will come across is fiberglass and spray-in type. These types have low benefits and not recommended for insulating a garage door.

3. Cut To Size

Next crucial step is to cut the insulation to a size that meets the dimension of the garage door panel. You may use a utility knife or sharp edged scissor. Watch carefully not to err on the shorter side.

4. Affix

Now, place the insulation on the garage door panel and trim the excess insulation if needed. Carefully affix the insulation on the panel. Double sided tape would be the best for this activity. Go ahead to position the insulation on the door face, tape it and press it hard on the panel to ensure it has firmly fixed.

5. Insulation Kits

Garage door insulation kits are readily available nowadays at the hardware stores. These kits can provide you the every tool required to finish this activity which can speed up the process. Even if you choose to use an insulation kit, the process will remain the same as delineated here.

Make sure to leave the hinge area while attempting the insulation affix as this may interfere with the movement of the door. Likewise, adjust the spring tension after the insulation installation in order to avoid extra stress on the opener due to insulation weight. You can also opt to consider a door installation service which can avoid the hassles involved in this activity.

“Dormaster Garage Doors & Windows” is a pioneer for the garage door repair in Toronto area. We provide accurate garage door solutions for any of your residential or commercial needs. Our technicians are highly expert in any garage door concerns. Our services are wide. Why don't you have a quick look at our website http://www.promaster.ca/. We are just a call away.