The Instruction for GM Tech two hardware initial

The Instruction for GM Tech two hardware initial

The GM Tech 2 is a scanner that is definitely made use of to diagnose technical problems with specific GM vehicles ranging from 1992 to 2010. Even though applying the scanner itself can be a complex process that need to be performed only by specialists or car enthusiasts with a working know-how with the scanner, clearing the history data values for testing can be a uncomplicated procedure.



The Instruction for GM Tech 2 hardware initial

1. Eliminate the RS-232 loopback adapter (P/N 02001606) from the storage case (P/N 02002971). Plug it into the RS-232 port.

two. Attach the Tech 2 DLC cable (P/N 02002952) towards the VCI connector.

three. Locate the DLC loopback adapter (P/N 02002953) inside the storage case. Attach it to the DLC cable.

four. Find the NAO (P/N 02002972) energy supply and acceptable energy cord in the storage case. Insert the energy jack into the Tech 2 DLC cable,or into the bottom in the Tech two next to DLC cable connector.

five. Turn on power by pressing the PWR button situated around the Tech 2 key pad.

six. Tech 2 hardware is verified automatically by the POST Test.

7. Disconnect the RS-232 loopback adapter, the energy provide, plus the DLC loopback adapter and return to the Tech two storage case.



The only explanation we found ours was from a various auction for any kent moore timing belt tool. We asked if they had any Tech 2's. Uhhh...yeah we do..Look for GM dealers closing shop. On eBay, search Kent Moore tools, J tools, AC tools, transmission tools and so forth. Hoists, tire changers and so on at autonumen.com.